Tin can for glue and paint

How to buy round cans and what are the reference standards?

Round cans, although only two words, but it contains a lot of knowledge content, you need to learn and master, you can know what is a round can, and how to use it properly and reasonably. Therefore, this can only be achieved if the work is taken seriously and carried out, and at the same time, round cans are used in suitable situations.

1. How to buy round cans and how to buy them

The purchase of round cans is an important task from a professional point of view. It cannot be treated and carried out because if there is a wrong choice, it will affect the normal use of the product and its use, even if it cannot be used. Users bring economic losses. In the purchase process, it is also necessary to consider some relevant factors, among which the product origin, parameters, quality, price and manufacturer are five must be considered and cannot be missed. In addition, it is also possible to take into account the product use environment and usage requirements.

There are different ways to purchase products for round cans. You can either directly find the manufacturer to purchase the product or do it on the industry website. However, no matter which way you choose, you need to know the specific information of the product and the manufacturer before you can make an accurate judgment. In turn, you have the right choice.

2. Reference standard for round cans

Round can, which has a corresponding reference standard, and it is a packaging container, its original reference standard is GB/T 15170-1994, however, in order to adapt to its continuous development, this standard content is carried out. The modification was made to comply with the new situation. The specific modification was: changing the round tank airtight test, hydraulic test and drop test from the original list to the text. In addition, the test method and the ring strength test are also described in words.

Round cans, whose specific reference standards are:

GB/T 4857.3: Test method for static load stacking of packaging and transportation packages

GB/T 4857.5: Test method for drop of packaging and transportation packages

GB/T 13040: Metal container packaging terminology

In these standards, there will be some conformity, so let's briefly explain: H refers to the outer height, h refers to the inner height, d refers to the inner diameter, d1 refers to the inner diameter of the tank top, d2 refers to the inner diameter of the tank bottom, T is Refers to the can type with taper, S refers to the can type without taper, I refers to the first round can, II refers to the secondary round can, and III refers to the tertiary round