1. Relative humidity in the barrel
It must be well understood that humidity affects the drying speed of plastic buckets. Therefore, the relative humidity of plastic barrels is also an important factor affecting product quality. When the relative humidity in the barrel is low, the water vapor pressure difference between the surface and the dryer is large, and the drying speed is fast, and vice versa.
2. Melt pressure
The high melt pressure promotes good plasticization and uniform coloring of the mixture. Because it is a blend of high-density polyethylene and low-density polyethylene, and the coloring anti-field, the crystal points and cloud-like patterns on the parison are reduced. So we will increase the screw speed to increase the melt pressure.
3. Temperature
For plastic buckets, it is very important to master the temperature. This is because the temperature has a significant impact on the performance of plastic extrusion and parison. Increasing the temperature of the extruder can reduce the viscosity of the melt, improve the fluidity of the melt, reduce power consumption, and increase the screw speed without affecting the performance of the plastic. Mixing and plasticizing effect. To achieve this, you can use an electronic temperature controller to stabilize the process temperature while saving significant energy.
https://www.fhpails.com/






