Home > Knowledge > Content

How to clean the paint bucket

Oct 12, 2021

1. Generally, hot caustic soda solution is used to clean it, which can quickly clean the residual components inside, and also remove the surface printing or gold-plated layer, and finally clean it with water or solvent! Soak in hot washing powder water. After 24 hours, rinse with steel wool. If the comparison is repeated several times.

2. Fill the bucket with water and leave it alone. After a week, pour out the water in the bucket. The patent leather floating in the bucket is softened by the water attack. You can easily peel off the patent leather and make it clean, just like a new bucket.

3. Grease made of general hydrocarbon base oil can be cleaned with petroleum ether. The more expensive fluorine-based grease is cleaned with a fluorine solvent. Scald it with hot water, then scrape it with your nails in a few minutes. Wash it with alcohol, use clean sand, add some detergent and add water, seal the lid and shake it vigorously to clean.

4. Water-based paint can be washed with water, and oil-based paint should be washed with solvent. Use several barrels of 1:1000 environmentally friendly enzyme diluent to tighten the lid and shake well or mix with baking soda 70% citric acid 15% salt 15%, moisten first, scrub with the dipping material, and rinse again until it is clean. The mixture will not pollute the environment. The ingredients without citric acid can also be used with lemon juice.

https://www.fhpails.com/

Send Inquiry