1. When transporting the filled liquid, it should be lifted by two hands or transported with a forklift wooden pallet. Avoid dragging the barrel directly on the ground to avoid abrasion and bruising o
The volume of the fuel tank of the plastic barrel is too small, the heat dissipation area is not enough, and the capacity of the cooling assembly is too small. The temperature of the climate and worki
1. Use an eraser to rub in along the edge little by little to easily remove the marks. Due to the difference in the degree of stickiness and time, using alcohol + eraser to wipe, the effect will be ve
In fact, most of the reasons are due to the bumps that occurred during the transfer or during the storage. However, the wall of the plastic bucket will become thinner and leaking if it goes on for a l
1. Plastic barrels have the characteristics of light texture, good toughness, good sealing, and no rust. We can use them for the packaging, storage and transportation of liquids, especially packaging
When using plastic packaging barrels, you must know whether your products can be used in plastic packaging barrels. Because some chemical liquids use plastic packaging barrels, they will corrode the p
1. First of all, the environmentally friendly packaging barrel should be a kind of low-cost, high-degradation-efficiency packaging, high stability and strong controllability.
In fact, most of the reasons are due to bumps during transportation or storage, but in this way, the wall of the plastic bucket will become thinner and thinner for a long time, and leakage will occur.
One: The plastic barrel is beautiful and smooth inside and outside, seamless without welding, light weight, good strength, impact resistance, corrosion resistance, non-toxic and tasteless, and conveni
1. When choosing lubricating oil plastic barrels, pay attention to the airtightness and water vapor permeability of the plastic barrels. These are two important indicators for choosing lubricating oil
1. Polyethylene film Lightweight and transparent, it has the properties of moisture resistance, oxygen resistance, and excellent
1. The plastic barrels after packaging the goods are stacked on double-sided flat pallets, the size of the pallet is not greater than 1.3 meters; each pallet is stacked with one more layer, the number
