According to the "National Directory of Hazardous Wastes", waste packaging, containers, filter and adsorption media containing or contaminated with toxic and infectious hazardous waste belong to the H
Tinplate is an iron sheet with a layer of tin plated on the surface, it is not easy to rust, also called tin plated iron. This kind of coated steel plate has been called "tinplate" in China for a long
The first point is the quality of the barrel. If you put water in the bucket, the weight of a bucket of water is already very high. Plastic buckets must be able to withstand this weight. If there is n
When a plastic barrel is exposed to light, it usually changes in temperature, which can be regarded as heating. The increase in temperature will accelerate the diffusion of oxygen, thereby speeding up
When many users use chemical plastic barrels, once the chemical plastic barrel has a hole, it will be thrown away immediately, and no measures will be taken. Then this method wastes both chemical plas
1. Filling 1. Open the lid and insert a tube with an outer diameter smaller than the sealing diameter for filling. 2. The temperature of the filling liquid should not be higher than 50°C. Tighten the
In terms of the convenience of carrying and using plastic barrels, the first is plastic barrels with small capacity and lighter packaging weight. This kind of plastic barrel packaging is mainly reflec
Plastic barrels also have a shelf life. After the expiration date, the plastic will age, become discolored and become brittle. If the plastic box used is found to be yellow or no longer transparent, i
The anti-theft ring of the plastic barrel lid does not fall off and is closely related to the precision of the abrasive tool. If the precise parameters of the abrasive tool are not reached, it will di
1) The raw material itself is poor in color and brightness, and it has changed after being plasticized at high temperature. (2) The service life of the production equipment is too long, causing the ag
First: The reason may be that the barrel is too thin, which causes the barrel to be thin and deformed after being shaped. Second: The production speed is too fast and the cooling process is not adequa
First: In the process of plastic barrel production, it is possible that the screw barrel may be cut off, causing the screw to run idly and generating gas friction. During the process of injection, the