Attention should be paid to the nozzle temperature and the mold temperature when performing injection molding.
The plastic barrel can select the fixed pump oil supply system of the oil pump capacity according to the fast-forward speed.
To reduce the density of plastic drums, there are three ways to achieve this goal: foam modification, adding light additives and blending light resins.
Under normal circumstances, the damaged plastic drums are difficult to correct, and are difficult to be recovered and reused. If they are burned, they will release harmful gases.
We often pay more attention to the problem of plasticizers in plastic products, but ignore the phenomenon of aging and cracking of plastic products in cold environments.
The impact of the shrinkage rate of plastic barrels mainly depends on the plastic structure. For example, thick-walled plastic parts have a greater shrinkage rate than thin-walled plastic parts
The working principle of the welding gun welding method is that after each circuit is connected, the air compressor continuously sucks in air and monitors it to compress it into high-pressure gas.
After rust is generated in the plastic bucket, you can use white vinegar. Because the rust contains iron hydroxide, it is alkaline and needs to be neutralized with acid
Plastic buckets are often used to store liquids in industrial applications. At this time, pay attention to the ambient temperature of the storage, because the temperature is too high
The transparent plastic square box will inevitably have stricter requirements on the surface quality of plastic products due to the higher light transmittance.
Cold resistance: The requirements of heat and cold boxes for heat resistance and cold resistance will be relatively high, and will not be deformed in high-temperature water
The direction of manual lateral scrolling and lateral movement can be used when moving.