In fact, most of the reasons are due to the bumps that occurred during the transfer or during the storage. However, the wall of the plastic bucket will become thinner and leaking if it goes on for a long time. Under such a phenomenon, you have to I bought the packaging barrel again, but your expenses will increase greatly in this way, which is very uneconomical.
There is another possibility that it is a chemical reaction liquid. If it is salt, alkali, or other mixtures, there is no problem, but it contains strong oxidizing liquid, for example, the temperature is higher than 60 degrees, and the concentration is higher than 7%. 15% sulfuric acid, more than 30% concentrated nitric acid, etc. may cause deformation of the plastic barrel. When you are choosing plastic packaging barrels, we are better to choose products from large manufacturers. Only in this way can we help your application not show leakage.
https://www.fhpails.com/
