Since the main component material of the plastic chemical barrel is PE, after the plastic chemical barrel is used up, a large amount of oil will remain on the inner wall, and it is very troublesome to clean. I found some methods on the Internet today, which can remove the residue of plastic chemical barrels very well. I hope everyone can get it!
1. When removing the residues on the chemical plastic barrels, no matter whether you use de-glazed water or vinegar, you should ensure that all the residues are soaked in order to ensure effective removal.
2. Find a piece of dry cloth soaked in vinegar, and cover it on the chemical plastic bucket with residue. After the impurities are all wet, the hard objects can be easily removed with thin sheets.
3. The residue on the chemical plastic barrel can also be removed with a mixture of soap and a small amount of ammonia water, which can make the surface of the chemical plastic barrel more shiny.
Fourth, heating the chemical plastic barrel can also remove the residue; use the heat seal of the hair dryer to soften the residue on the chemical plastic barrel, and the residue can be easily removed when the viscosity becomes small.
5. You can use an eraser to wipe the edge of the chemical plastic bucket, which can easily remove marks. For the different viscosity of the residue, the required scrubbing time will also be different. If there is alcohol, the cleaning effect after use with it is better or better.
Sixth, you can also use Xin sodium water to scrub the chemical plastic barrels, and you can also receive a good cleaning effect.
Seven, you can also use a relatively viscous transparent glue to tear the residue, so that the stains on the surface can also be removed.
8. Fengyoujing scrubbing chemical plastic barrels can also achieve a good cleaning effect.
https://www.fhpails.com/
