Home > Knowledge > Content

Coating on the bottom of the steel drum

Mar 28, 2021

Many users are very concerned about the peeling off of the coating at the bottom curling of steel drums, and some barrel-making companies do everything possible to paint the bottom curling. In fact, to be honest, these are all hard work, because in the application, the bottom of the steel drum should not be left on the ground. Even if you want to put the steel drum on the pallet, you need to shovel it up with a forklift, and the fork of the forklift will touch it. Remove the coating on the bottom curl. However, in the current production process and method of steel drums, whether it is painting or conveying, it is impossible for the bottom to not touch the roller or chain. It is impossible to keep the coating on the bottom of the steel drum intact. It is precisely because the coating is worn off at the bottom of the steel drum that the steel drum is not electrically insulated from the ground, and therefore no static electricity will accumulate on the steel drum. Therefore, this is conducive to the prevention of steel drums. If static electricity is harmful, users and barrel-making companies should not worry about it.

https://www.fhpails.com/

Send Inquiry