The packaging supplies that can be seen everywhere in chemical plants are chemical plastic barrels. Chemical plastic barrels play an important role in protection in the chemical industry. But what mat
1. Generally, the highest heat that a plastic barrel can carry is less than 108 degrees, and the lowest heat is minus 70 degrees. Therefore, under normal circumstances, the temperature of liquid carri
The problem of plastic barrel deformation is a place that attracts the attention of many users, and there is a certain relationship between the deformation of the plastic barrel and the thickness of t
1. Plastic materials are easier to process and require relatively low technical level of processing equipment and operating workers; 2. The investment cost of chemical plastic equipment is low, which
1. When the plastic bucket is used in the open air, it should avoid direct sunlight as much as possible, which can help extend the service life of the plastic bucket. 2. In the process of using the pl
There are many performance test methods for chemical plastic barrels, such as hardness test indicators, resistance to cold and heat, description of barrel wall thickness, high temperature resistance t
1. If the filling product is prone to produce volatile gases, especially in February, April, and August when the temperature difference effect is obvious, the lowest temperature of the day should be s
The chemical reaction of plastic barrels exposed to the sun is caused by multiple factors. First of all, ultraviolet light, the dominant factor in photochemical reactions, can directly cause molecular
Chemical plastic barrels have the advantages of impact resistance, aging resistance, light weight, no leakage, acid and alkali resistance, and long service life. Chemical plastic barrels may be damage
1. Fasten the lid on the outside of the chemical plastic barrel. 2. If the contents of the barrel reach 40°, fasten the outer cover and let the product cool down and proceed at room temperature; when
1. Poor conductivity. The current is consumed on the wire, and the current distributed to the surface of the workpiece is too small. 2. The workpiece contains high carbon content. High carbon steel, c
The first is to protect the goods packaged in iron drums to prevent risks and damage. Such as leakage, waste, theft, loss, scattering, doping, shrinkage and discoloration. During the period from produ