1. Prepare the raw materials and tools for making iron barrels. Generally speaking, we need to prepare a large enough iron sheet, pliers and tools such as screws and screwdrivers, and some other items
1. Processing temperature. The processing temperature of bottle-shaped blow molding products is mainly related to the characteristics of the plastic raw materials and equipment used. Under normal circ
Closed iron buckets are a kind of iron buckets. The most important thing when making them is the selection of the original material and the processing technology. The selection of raw materials is mor
Under normal circumstances, the tin can packaging we choose is to add points to the product. If the tin can packaging cannot add points to the product, it will be meaningless. Therefore, we cannot be
1. Wet press dry method, that is, wait for the printing ink on the tinplate print to dry, and then glaze on the tinplate surface. This glazing method does not cause problems such as ink penetration an
1. The ester solvent in the varnish reacts with the iron container to turn black when it meets with water. 2. Turpentine can easily produce reddish brown pigment in iron drums. 3. Gold and silver powd
1. Check all parts before use and clean the paint bucket according to the situation to ensure that the paint bucket is in good condition. 2. The amount of material added should not exceed 2/3 of the v
Method 1: Prepare more egg shells, then crush them and place them in oil bottles or oil drums. Then add hot water and shake them vigorously. After a few minutes, the oil inside will come down. Just ri
1. Do not place the iron barrel in a place exposed to sunlight or a place with high temperature, as it is easy to expand due to heat. 2. Keep it out of reach of children. 3. Tighten the cap tightly, a
Users who have used plastic barrels may understand that some deformation occurs after a period of use. Many users think that this problem is due to the good sealing. After the plastic barrel is filled
Since the bottom of the 25 kg plastic bucket will inevitably protrude into the tank to form a spherical crown during molding, the foundation should be made into a spherical crown similar to the bottom
Generally speaking, the yellowing of plastic products is caused by the aging or degradation of materials. Generally, PP is caused by aging (degradation). Due to the presence of side groups on polyprop