The outer cover needs to be tightened by external force (torque can be used to tighten the wrench), the sealing ring must be in close contact with the surface of the barrel mouth after assembly, and t
Derusting with ammonium sulfate solution: add 1 kg of ammonium sulfate to 20 kg of water, stir to dissolve, put the rusty iron bucket into it, soak the rust automatically according to the degree of ru
1. Regularly check the iron drums for corrosion, bumps, defects, dents, and leaks. Put the defective iron drum in a separate secondary packaging drum or leak emergency drum. 2. Make sure that the iro
First we need to know its main structure. The first is the galvanized barrel. Generally speaking, there are two galvanizing processes for galvanizing barrels, hot-dip galvanizing and cold galvanizing.
Chemical iron drums have good heat resistance and cold resistance, hardness, tensile strength, electrical insulation properties and toughness, and have good chemical stability, hardly dissolve in any
First of all, we must control the product production process parameters, reduce the appearance of deformation, reduce the appearance deviation, and ensure the same size;
1. Check all parts before use and clean the paint bucket according to the situation to ensure that the paint bucket is in good condition. 2. The amount of material added should not exceed 2/3 (26L) o
1. If it is used for filling liquid, it is calculated according to the specific gravity (density) of the product, but 10% of the space required for the expansion and cracking of the product must be re
Paint buckets are generally made by molding methods, and different molding methods often have a great impact on the performance and cost of the product. Various plastics commonly used in plastic packa
Chemical plastic barrels are generally used to contain liquid and solid objects in the chemical, pesticide, pharmaceutical, food, hardware and electronics, electromechanical and other industries. It h
Plastic barrels are made of high-molecular insulating materials such as polyethylene and polyvinyl chloride. Gasoline is a Class A flammable liquid, its flash point is less than 28 degrees, and the lo
Extrusion: The grade used for extrusion production generally has a melt index less than 1 and a medium to wide MWD. During processing, low MI can obtain suitable melt strength. Wider MWD grades are mo