When choosing a galvanized steel drum, you can't just look at the capacity. To choose a good galvanized steel drum, you need to consider its volume, internal coating, raw materials, sealing, etc.: 1. Galvanized steel Bucket volume confirmation 1. If the user fills the liquid, it should be calculated according to the specific gravity (density) of the product, but leave enough space for 10% of the space required for the expansion and cracking of the product to prevent the galvanized steel bucket from being deformed when it is dropped during transportation. cracked. 2. If it contains solids, the manufacturer can be asked to provide galvanized steel drums of the same volume for trial installation, and then convert the galvanized steel drums of the required weight and volume. 2. The determination of the inner coating of galvanized steel drums can be carried out by the galvanized steel drum factory to provide various inner coating samples for soaking test analysis of coating changes, whether the pigments contained in the coating are dissolved, discolored, falling off, etc. It is up to the user to select the appropriate inner coating type. The surface of the barrel without inner coating has a protective layer of mineral oil, please choose the packaging according to the product. 3. Raw materials for the production of galvanized steel drums Since the thickness of the cold-rolled sheet is different from that of the manufacturer, there is a corresponding error in the weight of the galvanized steel drum. Galvanized steel drums have different requirements on the inner wall during the production process, which inevitably produces different degrees of odor. Therefore, please pay attention when selecting buckets. 4. Confirmation of the lining ring of the closed galvanized steel drum type. The inner lining ring should be made of different materials according to the different characteristics of the user's products. 5. The 200L galvanized steel drum (cold-rolled sheet thickness 1.0mm) selected by the user should not be used for export packaging. If it is used for export packaging, it will be caused by the quality problem of the packaging drum. The user promises not to hold the supplier responsible for any loss.
