For the storage of a large number of chemical steel drums, if you want to store them well and have a longer service life, these small precautions must not be ignored: (1) How to prevent rust in special matters: try to cover the outer cover immediately after unloading the edible alcohol and Close the lid tightly to keep the chemical steel drum sealed. Use the chemical steel drum cover to keep the oil drum mouth clean and free from moisture and impurities. (2) The storage site of chemical steel drums should be solid and level. There are drainage and water seal oil isolation facilities around the storage site. The chemical steel drum storage site is conducive to fire fighting and personnel evacuation. Easy to check and handle. (3) When placed outdoors due to limited conditions, it should be inclined to a certain angle at the mouth of the barrel to prevent external moisture from accumulating at the mouth of the barrel and seeping into the barrel of oil. If the outer packaging is a chemical steel drum, it should be handled with care to avoid collision and deformation. (4) The chemical steel drums for indoor storage can be placed upright, but the drums should be slightly inclined to prevent rainwater from accumulating on the surface of the drums and covering the copper bolts. Water has adverse effects on chemical steel drums. Add dunnage under it to prevent the chemical steel drums from being corroded by the ground water. (5) The chemical steel drums placed upright are placed on the leakage tray, so that even if there is leakage or leakage in the chemical steel drum, the oil leakage will be controlled in the leakage tank in the leakage tray, and will not flow to the ground, resulting in Danger. The leakage tray can be moved with a forklift or a forklift. The chemical steel drum can also be placed on the leaking platform to prevent leakage. In addition, IBC barrel leakage trays, leakage basins, leakage gaskets, leak-proof dikes, and economical leakage trays are all good storage methods for oil and chemicals to prevent the leakage of chemical steel drums and chemical barrels. (6) Keep away from open flames and store in a dry, cool and ventilated place. Chemical drums should never be stored near steam lines or heated areas. Be careful to avoid ignition sources when storing and using. (7) Keep the barrel body and barrel surface clean and clearly marked. The chemical steel drums should be checked frequently for leaks and whether the signs on the drums are clear. (8) Keep the ground clean, so that the leakage can be detected and dealt with in time. Among the current chemical steel drum manufacturers, chemical steel drums are generally finished steel plates, which are highly leak-proof. The anti-collision design adopted makes the drums difficult to break when dropped from a high altitude. The silent and open tooth design, the barrel mouth is fastened with threaded screw plugs , In addition, the sealing cover is maintained and waterproof, and the outer body of the barrel is maintained by baking paint, which is rust-proof for a long time, which is a good reflection of the safety of chemical solvents.
www.fhpails.com
